モビフレックス

MOWIFLEX™ – Combining strengths of thermoplastics and PVOH


MOWIFLEX possesses all the properties of standard PVOH and  can be processed as a thermoplastic at the same time creating the possibility to be used in various application fields. It can also be combined with other polymers to modify the properties of the end product.

MOWIFLEX™ – 3D 印刷用水溶性サポート材料


MOWIFLEX™ は長年培ったクラレポバールの技術を駆使した、熱溶融成形用銘柄で す。優れた造形性、冷水溶解性、低吸湿性を実現した新銘柄はFDM (Fused Deposition Modeling/熱溶解積層法) 技術に新しい可能性を提供します 。

MOWIFLEX™ FOR RAPID PROTOTYPING IN 3D PRINTING


MOWIFLEX is a compound of PVOH and plasticizer that has been designed in order to suit thermoplastic processing needs. MOWIFLEX™ possesses all properties of standard PVOH, such as water solubility, and  can be processed as a thermoplastic at the same time – a decisive advantage for 3D printing.

MOWIFLEX™ – A CRUCIAL COMPONENT FOR FOOD CASINGS


MOWIFLEX is a special compound of PVOH and plasticizer designed for thermoplastic processing. Due to its unique properties it is ideally suited for the use in foodstuff casings that comprise a blend of a polyamide base, MOWIFLEX and other optional agents.

MOWIFLEX™ FOR INJECTION MOULDING PROCESS


MOWIFLEX™ decisive advantage in comparison to other polymers is the low shrinkage during the cooling phase. This small change in specific volume is dedicated to the high crystallinity of PVOH and allows a shorter cycle time, necessitates less material and causes a lower tension in the final form.

MOWIFLEX™ プラスチック成形に新たな可能性を提供します


MOWIFLEX™ は生分解性のポリビニルアルコールをベースとする熱可塑性組成物です。冷水に溶解可能で、かつ低吸湿である特徴は、はFFF (fused filament fabrication/熱溶解積層法)での水溶性サポート材としての使用に最適であり、 MOWIFLEX™の優れた造形性により複雑な成形物の印刷を可能とします。印刷後、MOWIFLEX™ は水道水により容易に溶解除去可能で、その水溶液は認証機関TÜV AUSTRIA による生分解性認証を得ておりますので、一般廃水と同様に排水処理して頂くことが可能です。


先頭へ